|
- Provision Catalyst 9300 switch to Catalyst Center - Cisco Community
PKI Config push Failed - Unable to push configuration to device ip x x x x Device response - inconsistent value: Device refused one or more commands This means a command (or more) in the template is incompatible with the 9300 If the template works with 3650 3850, start checking the uplink config because this could one of the culprits
- Inconsistent Peer VLAN ID - Cisco Community
I'm having some trouble trying to figure out why I'm getting the following errors in my logs This morning, for the first time in over a year, my switch stopped communicating with my core switch, so I checked the log Feb 27 16:25:15 364 UTC: %SPANTREE-2-RECV_PVID_ERR: Received BPDU with inconsi
- Solved: spanning tree root guard command - Cisco Community
in my LAN the all access layer switchs stacks are connected directly to core backbone switch (cisco 6509) via sfp fiber-optic i want to protect my spanning tree setup with the "root guard" command 1 where would i set this ? on uplink ports on access layer switches ? or on core backbone ports to
- Received BPDU with inconsistent peer vlan id 2 on Port-channel3 VLAN4
Inconsistent peer vlan " "Blocking Port-channel3 on 4 Inconsistent peer vlan " The port channel2 on switch "A" is in reality one singular port, and the switch "B" on the other end of the cable also has a port channel composed by only one port This applies to this specific switch connection and all the other switch links towards switch "A"
- Solved: %Inconsistent address and mask - Cisco Community
Start a conversation Cisco Community Technology and Support Networking Switching %Inconsistent address and mask Bookmark | Subscribe
- Inconsistent peer vlan and Inconsistent local vlan - Cisco Community
This makes Nexus complaining about inconsistent peer vlan and Inconsistent local vlan In short, I need to "translate" vlans 31,32,33 into vlan 21 Vlan translation 1-to-1 won't work as I can't add multiple entry with same translated vlan Vlan translation n-to-1 won't work as it makes QinQ (as far as I get it from documentation)
- vPC type-1 configuration incompatible - STP error
Joined a pair of 92K switches in a VPC domain I receive the following below Anyone know what may be wrong as I checked both switches and everything looks the same? Configuration inconsistency reason: vPC type-1 configuration incompatible - STP vPC domain id : 10 Peer status : peer adjacency fo
- Inconsistent address and mask - Cisco Community
Hello guys, I new at this, I start studying CCNA and now I am at the beginning with CCENT I made a simple topology in Packet Tracer: 1 PC, 1 Laptop, 1 Switch, 1 Router,1 Server I will attach a photo of it I used the IP 192 168 100 1 to the interface of the router who binds the LAN and the mask 255
|
|
|